后加工处理的英文

• post processing
• postprocessing

• "后"英文翻译    behind; back; rear
• "加工"英文翻译    process; machining; working; ...
• "处理"英文翻译    deal or cope with
• "加工处理" 英文翻译 :    transform; working over
• "加工处理管" 英文翻译 :    process tube
• "加工处理鲸" 英文翻译 :    treating of whales
• "冷加工处理" 英文翻译 :    cold-working treatment
• "热加工处理" 英文翻译 :    hot-working treatment
• "过程加工处理" 英文翻译 :    process
• "回收加工处理" 英文翻译 :    reprocess
• "加工处理循环" 英文翻译 :    processing cycle
• "信息加工处理" 英文翻译 :    information processing
• "印版加工处理" 英文翻译 :    plate finishing
• "废物加工处理商" 英文翻译 :    waste reprocessor
• "核糖核酸加工处理" 英文翻译 :    rna processing
• "缓和树脂加工处理" 英文翻译 :    mild cure
• "喷丸加工处理法" 英文翻译 :    blast working process
• "最后加工,表面处理" 英文翻译 :    finish
• "表面加工处理与喷涂" 英文翻译 :    surface preparation and coating
• "加工处理管，管状反应器" 英文翻译 :    process tube
• "柔软加工处理棉织物" 英文翻译 :    macana
• "阳极氧化铝加工处理法" 英文翻译 :    alumilite process
• "后加工" 英文翻译 :    after-processing; aftertreatment; post processing; postproce ing; postprocessing
• "最后加工，休整，光制，完工，表面处理" 英文翻译 :    finish
• "精工处理" 英文翻译 :    finishing treatment

• Drawing behaviours reached the best value when the draw rate , draft temperature in bath and the content of baso4 were 200 % ~ 300 % , 40 , 60 % ~ 70 % , respectively
  其中对60 % ， 70 %的纤维后加工处理时，其拉伸率为200一300 % ，水浴拉伸温度为40时，纤维的拉伸性能最好，可得到加工性能比较理想的纤维。
• The structure and mechanical properties of the filament with the different content of barium sulfate were discussed roundly . the effects of temperature , shearing force and the content of baso4 on the rheological behaviours were investigated
  用不同配比的baso _ 4 / tpu共混切片进行熔融纺丝，将纺制的纤维进行后加工处理，以便获得综合性能较好的纤维。
• The properties of low carbon steel can be greatly enhanced when its grain size becomes ultrafine . approaches to obtain ultrafine grain size for low carbon steel , such as microalloying , electromagnetic field treatment and thermo - mechanical treatment after rolling , are given in this paper . in addition , the mechanism and technologies of ultrafine granulation are also discussed
  低碳钢的性能可通过晶粒超细化得到改善,讨论了低碳钢生产过程中利用微合金化、电磁场处理和轧后加工处理等方法进行的晶粒超细化,讨论了晶粒超细化的作用机理和生产工艺。