叶片间的英文

• interlobe

• "叶片"英文翻译    blade vane; blade; paddle; l ...
• "间"英文翻译    space in between; opening
• "叶片间槽" 英文翻译 :    passage between blades
• "叶片间的" 英文翻译 :    interlobate
• "叶片间隔" 英文翻译 :    vane spacing
• "叶片间角" 英文翻译 :    lobe angle
• "叶片间距" 英文翻译 :    blade acing; blade opening; blade pitch; blade spacing; blading-piston; spacing of blades
• "叶片间空间" 英文翻译 :    interlobe space
• "叶片间流道" 英文翻译 :    vane channel
• "叶片间流动" 英文翻译 :    blade-to-blade flow
• "叶片间隙" 英文翻译 :    blade clearance
• "切向叶片间短" 英文翻译 :    tangential blade spacing
• "叶片间的流道" 英文翻译 :    vane channel
• "叶片间的通道" 英文翻译 :    passage between blades
• "推进器叶片间隔" 英文翻译 :    propeller blade spacing
• "容积式压缩机叶片间的空间" 英文翻译 :    interlinking space
• "因边缘厚度造成的叶片间通道的阻塞系数" 英文翻译 :    edge-thickness coefficient
• "剥片间" 英文翻译 :    strippingroom
• "观片间" 英文翻译 :    viewing booth
• "节片间" 英文翻译 :    intergeniculum
• "叶片" 英文翻译 :    1.[植物学] (leaf) blade2.[机械工程] vane; blade; paddle; limb 涡轮叶片 turbine blade
• "薄片间距" 英文翻译 :    wafer spacing
• "翅片间距" 英文翻译 :    spacing of fins
• "换向片间距" 英文翻译 :    distance beteen commutator segment; distance between commutator segment
• "晶粒片间的" 英文翻译 :    intercrystalline

• An analysis of approaches for multiple blade row interfaces
  多排叶片间交界面处理方法分析
• Railway rolling stock . functional general requirements . transistorized ballasts . collection of particular leaves
  铁路机车车辆.一般功能要求.晶体管化镇流器.特殊叶片间的联系
• In this way , when obturation cubage leave absorb oil cavity it connects the eduction oil cavity with the v trough and with the increasing of the turning angle , the size of the cross section of v trough become bigger and bigger , which make the pressure between the cavity of two blades much higher and higher , and until it completely connects the eduction oil cavity , it reaches the pressure of the eduction , and it can effectively reduces the fluid noise caused by high pressure return flow
  这样，当密闭容积离开吸油窗口之后，通过v型尖槽逐渐与排油窗口连通，随着转角的增加， v型尖槽通流截面积逐渐增大，这就使两叶片间容腔内的压力逐渐升高，直至完全接通排油窗口时，才升压达到压油腔的压力，这样可以有效地降低因高压回流而引起的流体噪声。
• Abstract : in order to improve the performance of a vortex classifier , a certain type of narrow plates are fitted in the passages between the blades in the rotor cage . this measure results in reduction in the cut size and increase in classifying precision . more significant effect is observed in the case of the rotor cage with fewer blades originally fitted . it is pointed out that the reason is due to the decrease in inertia counter vorticity
  文摘:在涡流分级机转笼通道中心加装窄叶片使产品分割粒径减小，分级精度提高.转笼径向叶数较少时加装效果明显，径向叶片数多时效果不明显.分析指出，这是减小了转笼径向叶片间惯性反旋涡强度的缘故