变形率的英文

• deformation rate

• "变形"英文翻译    be out of shape; become defo ...
• "率"英文翻译    rate; ratio; proportion
• "疲劳变形率" 英文翻译 :    fatigue deformability
• "伸长变形率" 英文翻译 :    rate of stretching deformation
• "塑性变形率" 英文翻译 :    index of plastic deformation
• "永久变形率" 英文翻译 :    percent set
• "有效附加变形率" 英文翻译 :    additive efficient deformation rate
• "形率" 英文翻译 :    form quotient
• "罐体容积残余变形率" 英文翻译 :    residual expansion rate of tank volume
• "标准形率" 英文翻译 :    normal form-quotient
• "法正形率" 英文翻译 :    normal form quotient
• "精子畸形率" 英文翻译 :    rate of teratosperm
• "绝对形率" 英文翻译 :    absolute form quotient
• "胸高形率" 英文翻译 :    artificial form-quotient; artificialform-quotient
• "变形" 英文翻译 :    1.(形状、格式起变化) be out of shape; become deformed; transshape; transfiguration; transformation; variant; transmogrification; modification : 自行车的前轮变形了。 the front wheel of the bicycle was out of shape. 孩子的腿变形了。 the child has a deformed leg.2.[物理学] (形变) deformation; distortion; (应变) strain; [生物学] (动植物的形态渐进) anamorphosis; (变异) metamorphosis; (畸形) dysmorphosis; (组织替换) transubstantiation; (器官变形) metallaxis; (物种演变) transmutation◇变形比 deformable ratio; 变形能力 deformability
• "变形使变形" 英文翻译 :    deform
• "变换（变形）" 英文翻译 :    transformation
• "变形 [转换" 英文翻译 :    transformation
• "变形(铸疵)" 英文翻译 :    strain
• "变形,变化" 英文翻译 :    transmutation
• "变形,畸形" 英文翻译 :    deformitas
• "变形,应变" 英文翻译 :    strain
• "变形,走样" 英文翻译 :    deformation
• "变形，变质" 英文翻译 :    transmute
• "变形，失真" 英文翻译 :    deformation

• If the compliances are not equal in the three orthogonal directions, it is anisoelastic .
  如果在三个垂直方向的弹性变形率并不相等，即它是不等弹性的。
• Probing into residual deformation rate and hydraulic test of volume of gas bottle
  气瓶容积残余变形率及水压试验探讨
• When ignoring the influence of deformation , the constitutive relation can be reduced to that of jaumann derivative
  当忽略变形率的影响时，欧拉表述的大变形固结本构方程可退化为通常的jaumann率形式。
• The results show that the bonding is good when the temperature , two passes deformation ratio of rolling are 1 250 c , 50 % respectively
  结果表明；轧制温度为1250c 、两道次的轧制变形率为50 %时，界面结合较好。
• Abstract : in this paper , the generalized variational principle of ela stic and plastic problem with finite displacement is derived by means of semi - in verse method
  文摘:利用半反推法，导出了弹塑性有限变形率形式的广义变分原理
• Deformation of diffusion bonded parts was correlated with pressure application . m ethod o f controlling deformation and obtaining non - deformation bonding was proposed
  针对实际构件，深入分析了加压方式和变形率的关系，并提出了控制变形量得到无变形接头的方法。
• Epe compression and transformation rate are the lowest in same type of material . suitable for repeatedly crash buffering . long distance transport of precise equipment , electronic and computer
  Epe压缩变形率,为同类包材中最低体积最小,适合多次撞击缓冲保护,精密仪器,电脑电子系列长途产品运输。
• Vacuum diffusion welding of refractory steel to heat resistant alloy was investigated in this paper . the effect of welding parameters on the deformation ratio of joints was examined
  针对耐热合金与耐热钢的真空感应扩散焊，研究了扩散焊连接工艺参数对接头变形率的影响、接头变形率与接头性能的关系以及不同接头变形率的微观形态。
• Methods of test for flexible cellular materials - method 17 - determination of tear strength of flexible cellular material with an integral skin - method 18 - determination of compression set under humid conditions
  软质微孔材料试验方法.第7部分:方法17 :用整皮测定软质微孔材料撕裂强度方法.方法18 :在潮湿条件下测定加压变形率方法
• The influences of the temperature , speed and deformation ratio of rolling during producing composite stainless steel band by inversion casting on the bonding between the mother band and solidified layer were investigated
  摘要针对用反向凝固法生?不?钢复合带的工艺，研究了轧制温度、轧制速度及轧制变形率对母带与凝固层间结合的影响。