反复加载的英文

• repetitive loading
• reversal in loading

• "反复"英文翻译    repeatedly; again and again; ...
• "加载"英文翻译    loading; straining; stressin ...
• "反复加载试验" 英文翻译 :    repeated loading test
• "低于疲劳极限反复加载处理" 英文翻译 :    understressing
• "重复加载" 英文翻译 :    repeated application of stress; repeated loading
• "反复加热试验" 英文翻译 :    reheat test
• "重复加载试验" 英文翻译 :    repeated load test
• "周期重复加载" 英文翻译 :    cyclic stressing
• "反复加荷三轴试验" 英文翻译 :    triaxial test of reiteration compacting
• "逐步反复加工机" 英文翻译 :    step and repeat machine
• "串行可重复加载模块" 英文翻译 :    serially reusable load module
• "可连用装入模块 串行可重复加载模块" 英文翻译 :    seriallyreusableloadmodule
• "反复" 英文翻译 :    1.(重复) repeatedly; again and again; time and again; over and over again 反复解释 explain over and over again; 反复思考 think and think; think a lot about sth.; turn sth. over in one's mind again and again; contemplate; 这个计划是经过反复讨论而产生的。 the plan was born out of repeated discussions.2.(翻悔) reversal; relapse; changeable; fickle 思想上有反复 have ideological relapses; 我讲话是算数的, 决不反复。 i mean what i say and shall never react from [go back on] my words.3.(回到原有状态) reversal; relapse 有很多反复和曲折 full of reversals and zigzags; 你的病虽然好了, 可要防止反复。 you are well now, but mind you don't have a relapse
• "加载" 英文翻译 :    loading; straining; stressing; load-on; out-in
• "复加成" 英文翻译 :    polyaddition
• "重复加" 英文翻译 :    repetition addition; repetitive addition
• "复加速度" 英文翻译 :    complex acceleration
• "回复加工" 英文翻译 :    backpacking
• "蔑以复加" 英文翻译 :    could not be surpassed; reach the limit
• "往复加料器" 英文翻译 :    reciprocating feeder
• "往复加热器" 英文翻译 :    reciprocating heater
• "无以复加" 英文翻译 :    incapable of further increase; at its height; blithering; can add no more; could not be surpassed; have done one's worst; in the extreme ; in the height of; not to be surpassed; nothing more to be added; the best [worst] of its kind; to a fault
• "重复加法" 英文翻译 :    iterative addition; repeated addition
• "重复加荷" 英文翻译 :    repeated loading
• "重复加热" 英文翻译 :    repetitive heating

• Unfortunately , this method does not converge and can flip - flop back and forth in the loadings on some links ( sheffi , 1985 , p . 113 )
  然而，不幸的是，这种方法不收敛，它会在某些路段上反复加载。
• The finite - element model utilized in this study is composed of 3d four - node shell ; both monotonic loading and cyclic loading are used for analyses
  本文通过三维四结点壳单元建立了梁?柱节点的有限元模型，有限元分析包含了单向和反复加载两种情况。
• This paper includes three parts of research : ( 1 ) cyclic loading tests of sixteen interior joints with rectangualr columns and four joint subassemblages with circular columns
  本论文进行了以下三方面的研究工作：进行了8组共16个矩形柱中间层中节点和4个圆柱节点组合体的低周反复加载试验。
• In this paper , the mechanics behavior of the src column and steel beam joints is studied . the tests of the src column and steel beam joints under the cyclic reversed loading are carried out , which are analyzed by the ansys 3d nonlinear finite element program
  本文主要研究劲性柱?钢梁节点的受力性能，对劲性柱?钢梁节点进行低周反复加载试验研究，同时用ansys三维有限元非线性分析软件进行计算机模拟。
• Both static and cyclic load tests are conducted for a same size specimen . the purpose is to find the effect on shear strength from different height - width ratio , and to get the shear resistance limit by static and cyclic loading . according to test results , the improvement suggestions for the wall details and design are presented in this paper
  同样尺寸的二个试件分别在顶端进行水平单调加载和水平方向低周往复加载抗剪试验一次，试验目的是测试墙体的不同高宽比对抗剪强度的影响以及墙体在单调加载及低周反复加载两种情况下的抗剪强度pu并做出比较，从而对墙体构造及设计提出改进建议。
• In this thesis , a series of single and double - direction - load tests are carried on the single plate framing connection between truss - steel beam and concrete wall often used in tall - building . by single - direction - load tests , the flexure capacity of the joints in use of different design is researched in particular , the effect of bolt design on the flexure capability is analysised ; based on the cyclic loading experiment , such characteristics of the anchors are analyzed - . bearing capacity . rigidity , ductility , hystersity capacity , energy dissipation and failure phenomena
  通过单向静力试验，研究了单剪板连接的不同设计对钢架梁的约束能力的变化，重点讨论了螺栓的设计对约束能力的影响；通过周期性反复加载试验研究了不同设计的单剪板连接预埋件的抗震性能的不同，重点分析了结构的承载能力、刚度、延性、滞回性能、耗能能力及其破坏特征等。
• An innovative strengthening scheme for reinforced concrete space beam - column joints using high strength steel wire mesh and polymer mortar jacket was proposed , and the quasi - static tests of three reinforced concrete beam - column joints with floor slab and transverse beams were performed to verify the efficiency of the strengthening scheme
  摘要提出了采用新技术高强钢绞线网片聚合物砂浆加固技术提高钢筋混凝土空间框架节点抗震性能的方法，并通过3个带有直交梁和楼板的空间框架节点试件的低周反复加载试验对该加固方法进行了检验。
• Experiments of six staggered beam - column joints of rc frame under slow cyclic loading are completed , among which three specimens " elevation difference of beams is one beam height and the others " is two - third of beam height , through the experiment study and the compare of their seismic behavior with ordinary joints ' , the following is concluded : 1
  本文通过对按混凝土结构设计规范设计的六个错层高度为一个梁高和2 3个梁高的梁-柱错层组合体的低周反复加载试验，将错层梁-柱组合体的受力性能与普通梁-柱组合体的受力性能作了比较，得出以下结论： 1