压步的英文

• cross over

• "压"英文翻译    press; push down; hold down; ...
• "步"英文翻译    pace; step
• "前压步" 英文翻译 :    forward cross-over
• "倒滑压步" 英文翻译 :    back cross over; backward crossover; backward skating
• "短急压步" 英文翻译 :    short chopping stride
• "压步滑行" 英文翻译 :    swing the front leg over
• "压步切转" 英文翻译 :    cutting
• "压步转弯" 英文翻译 :    cross over turn; cutting; grinding the bar
• "气压步进电机" 英文翻译 :    pneumatic stepping motor
• "压步倒滑练习" 英文翻译 :    cutting capers
• "压步分程传球" 英文翻译 :    cross over relay
• "液压步进马达" 英文翻译 :    hydraulic stemotor; hydraulic stepping motor
• "液压步履式螺旋钻孔机" 英文翻译 :    hydraulic gait-model all-auger drilling machine
• "压布靴" 英文翻译 :    presser foot
• "压布器" 英文翻译 :    fabric clamp
• "压布，轧布" 英文翻译 :    mangling
• "压不住心头的怒火" 英文翻译 :    be unable to restrain one's fury
• "压不住的" 英文翻译 :    inextinguishable

• Influence of roof bedding characteristic to first weighting interval
  老顶分层厚度对工作面初次来压步距的影响
• Cross over turn
  压步转弯
• Back cross over
  倒滑压步
• Combinatorial key stratum is the development of key stratum in shallow coal seam , it has the all properties of key stratum and itself ’ s property
  摘要在分析组合关键层有关参数的基础上，推导出了组合关键层初次来压步距和周期来压步距的计算公式。
• The strata behavior rule of longwall face with individual props in shallowly buried coal seam covered with thick soil was summarized
  实验和观测表明，尽管其上覆岩层的力学强度比较小，煤层埋深浅，但工作面初次来压步距大，矿山压力显现剧烈，周期来压台阶下沉量大。
• It was found that comparing with the case without dirt band the periodic weighting distance , median roof moving coefficient and support resistance all increased to different extent because of the influence of dirt band
  发现由于夹矸的影响，与不含夹矸层工作面相比，其周期来压步距、平均动压系数和支护阻力都有不同程度的增大。
• Because the loader and the moduls of elasticity exists part difference in key stratum and combinatorial key stratum , and the formulae of calculating the roof weighting step has difference , so there must be existing big error if we use the formulae of key stratum to calculate the shallow coal seam ' s weighting parameter
  大柳塔1203工作面按照关键层计算得出的顶板来压步距与实际相差很大，而按照组合关键层计算得出的顶板来压步距与实际基本吻合。
• ( 2 ) for the cyclic pressing technics , the thickness of densified layer of ring was studied , and the rules which the technics must follow had been investigated , and the influence of parameter on densification results had also been investigated . according to the theory of rolling , the conclusion of thickness of densification layer had been drawn for the dual - direction cyclic pressing . the term that decreased height of one stage and distance of one step advancing had been researched
  ( 2 )对楔压压透深度规律进行了初步探索,同时对楔压过程参数(单道次压下量和楔压步进量)所要遵循的规律以及楔压工艺参数(压制方式、压下量和压制温度)对坯件性能的影响进行了研究。