压力加工的英文

• plastic working
• press working
• pressed work
• presswork

• "压力"英文翻译    pressure; tension
• "加工"英文翻译    process; machining; working; ...
• "冷压力加工" 英文翻译 :    cold press working
• "热压力加工" 英文翻译 :    hot press working
• "压力加工法" 英文翻译 :    press working method; press-working method
• "压力加工费用" 英文翻译 :    press working cost; press-working cost
• "压力加工实习室" 英文翻译 :    forging
• "压力加工咬入角" 英文翻译 :    nip angle
• "自应力加工" 英文翻译 :    autofrettage
• "压力加工 压制成品 冲压成品 印刷作业" 英文翻译 :    presswork
• "压力加热器" 英文翻译 :    autoclave
• "压力加油" 英文翻译 :    forced fuel feed; pressure filling; pressure fueling; pressure oiling; pressure refueling
• "压力加油法" 英文翻译 :    pressure-feed oiling
• "压力加油口" 英文翻译 :    pressure filler inlet; pressure-refueling point
• "压力加油器" 英文翻译 :    drive type oil cup; drive typeoilcup; drive-type oil cup; pre ure oiler; pressure feed filler; pressure oiler; pressure-feed filler
• "压力加注" 英文翻译 :    pressure filling
• "压力加注的" 英文翻译 :    pressure filled
• "应力加压力" 英文翻译 :    stress
• "大气压力加料" 英文翻译 :    atmospheric pressure feeding
• "压力加油设备" 英文翻译 :    facilityes for pressure refueling; pressure-fueling equipment
• "压力加注接头" 英文翻译 :    pressure filling connector
• "静力加工硬化曲线" 英文翻译 :    static work hardening curve
• "底盘压力加油嘴" 英文翻译 :    chassis pressure fitting
• "压力加油接管口" 英文翻译 :    pressure-fueling socket
• "加工压力" 英文翻译 :    machining pressure

• Foundation wood sill treated with preservatives by pressure processes
  用压力加工法经防腐剂处理的基木
• During the pressure process the shape of the rare earth particles changed obviously
  压力加工过程中稀土相形貌发生明显变化。
• Cold press working
  冷压力加工
• This product is manufactured by powder metallurgy through compacting and pressure working
  本产品系采用粉末冶金方法经压坯和压力加工而制成。
• It is natural graphite as outstanding films phosphorus chemical processing , heat treatment , the non - pressure processing from any binder pure graphite products
  它是由天然磷片石墨经特出化学处理、热处理、压力加工而成的不含任何粘结剂的纯石墨制品。
• Pressure that this series the machine still have the extensive and in general use , be applicable to the every kind of plastic to process with take shape , if wash to press , squeeze , flection , fold the side , rivet jointing , orthopedics etc . ; stalk the pressing of set spare parts pack ; the plastics and what powder product inhibits ; stalk with other is similar to the correcting of spare parts ; the pressing of zero parts packs , and the pulling of spare parts of small scaled plank form stretch , type , fall material , press to print various uses of etc
  本系列机器还具有广泛的通用性，适用于各种塑性材料的压力加工和成形，如冲压、挤压、弯曲、折边、铆接、整形等；轴套类零件的压装；塑料及粉末制品的压制；轴类和其他类似零件的校正；零部件的压装，小型板形零件的拉伸、成型、落料、压印等多种用途。
• Compared with those of as - sprayed ring , hardness and tension strength of area near processing face are increased by 45 % and 40 % respectively . friction mechanical performance of the ring is improved at large extent , and especially the wearing amount is merely 13 % of as - sprayed rings . after dual - direction cyclic pressing , the pore - closed state and the distributing of density and hardness are nearly identical in every part of ring . the friction mechanical property is close to that of single - direction - cyclic - press ring
  靠近压力加工面部位,硬度较沉积坯提高了45 % ,拉伸强度较沉积坯提高了40 % 。双向楔压后孔洞闭合、密度硬度分布都比较均匀。单向楔压后,用压力加工面作为摩擦面, al - 20 % si / sicp复合材料的摩擦磨损性能得到大幅度提高,尤其磨损量为楔压前的13 % 。
• After a nationwide restructuring of colleges and departments in 1952 , the department was renamed as the department of machine manufacturing , comprising 5 disciplines manufacturing technology , foundry technology and equipment , forging and pressing technology end equipment , welding technology and equipment , and etall . graphy and heat treatmento in addition , on the basis of the original power machinery teaching group , the department of power machinery was set up , having 3 disciplines : thermal electr
  1952年院系调整，更名为机械制造系，设机械制造工艺铸造工艺及设备压力加工工艺及设备焊接工艺及设备金相热处理5个专业，并且由原动力组扩建成立了动力机械系，正式设有热力发电后改为锅炉燃气轮机汽车拖拉机3个专业。

• 压力加工的日语：プレス加工 プレスかこう