凸轮廓的英文

• cam contour

• "凸轮"英文翻译    cam
• "廓"英文翻译    wide; extensive
• "变轮廓凸轮" 英文翻译 :    variable contour cam
• "凸轮廓线" 英文翻译 :    cam profile
• "凸轮轮廓" 英文翻译 :    cam contour; cam profile
• "凸轮工作轮廓" 英文翻译 :    cam contour cam profile
• "凸轮廓线绘制" 英文翻译 :    layout of cam profile
• "凸轮理论轮廓" 英文翻译 :    cam pitch curve
• "轮廓" 英文翻译 :    outline; line; lineament; contour profile; rough sketch 脸的轮廓 the contour of a face; 山峦的轮廓 profile of the mountains; 先画个轮廓 , 再画细部。draw an outline before you fill in the details. 夜幕降临了, 但厂房还能看见个轮廓。 night fell, but the outline of the factory buildings was still discernible.; the factory buildings were silhouetted against the growing darkness.; 轮廓不清晰度 turbidity (相片); 轮廓清晰 clear-cut; 轮廓图 profilogram; scheme; keydrawing; schematogram; contour records; outline sketch
• "凸轮" 英文翻译 :    [机械工程] cam 推动凸轮 actuating cam; 急升凸轮 quick lift cam; 凸轮发动机 cam engine; 凸轮机床 cam cutter; 凸轮盘 cam disc; cam plate; 凸轮转子[随动件] cam follower
• "凸轮轴，凸轮鼓" 英文翻译 :    drum cam
• "凸轮轴凸轮" 英文翻译 :    cam of camshaft
• "箔轮廓" 英文翻译 :    foil profile
• "粗轮廓" 英文翻译 :    hazy out lines
• "舵轮廓" 英文翻译 :    rudder profile
• "勾轮廓" 英文翻译 :    crayon
• "画轮廓" 英文翻译 :    adumbrate; delineate; delineation
• "即轮廓" 英文翻译 :    contour
• "假轮廓" 英文翻译 :    false contouring
• "仅轮廓" 英文翻译 :    outlines onl&y
• "轮廓,外形" 英文翻译 :    contour
• "轮廓，大纲" 英文翻译 :    outline
• "轮廓，范围" 英文翻译 :    ambit
• "轮廓，仿行" 英文翻译 :    profile
• "轮廓标" 英文翻译 :    lkb-001

• The profile inspection of sc is studied detailedly
  详细研究了空间凸轮廓面检测技术。
• Optimization of cam contour by b - spline curve
  样条曲线优化设计凸轮廓线
• Study on the method for the nc machining conical cam profile
  圆锥凸轮廓面的数控加工方法研究
• Basic principles of non - equivalent machining of spatial cam surfaces
  空间凸轮廓面非等价加工的基本原理
• Profile design of cam with cylindrical roller - followers by offset surfaces method
  圆柱滚子从动件凸轮廓面的等距曲面设计方法
• Layout of cam profile
  凸轮廓线绘制
• The design of valve cam is mainly to design cam profile curve and is carried out in " dynamics correction method " in this paper
  配气凸轮的设计主要就是设计凸轮廓形，本文选用“动力学修正法”进行设计。
• This method uses the law of conservation of energy , adopts the method of sectioning and the cam profile is designed according to the outputted speed curve
  该方法应用能量守恒定律，采用分段的方法，按输出的速度曲线设计凸轮廓线。
• The mathematical model of the profile of cam was proposed on the basis of the method of reverse design with periodic boundaries and cubic uniform b - spline
  摘要基于反求设计的方法，以3次均匀b样条曲线和周期边界条件，建立了凸轮廓线的数学模型。
• Cam mechanism with variable inputting speed , its driving force will change along with the profile of cam , thus make the design of cam mechanism becomes a difficult problem
  摘要变速输入的凸轮机构，驱动力随凸轮廓线而变化，使得凸轮机构的设计成为一个难题。