冷模试验的英文

• cold model experiment
• cold-flow model test

• "冷"英文翻译    cold
• "模"英文翻译    mould; pattern; matrix
• "试验"英文翻译    experiment; test; trial
• "船模试验" 英文翻译 :    ship model test; tank experiment
• "船模试验槽" 英文翻译 :    experimental tank; model basin (or tank); towing tank
• "船模试验池" 英文翻译 :    experimental model basin; model tank; naval tank; ship model basin; tow tank; towing basin; towing tank
• "大规模试验" 英文翻译 :    large scale experiment; large-scale test; large-scale trial; largescale experiment; mass testing
• "刚模试验" 英文翻译 :    die try out die cast; die try-out die cast
• "刚模试验(压铸)" 英文翻译 :    die try-out，die cast
• "小规模试验" 英文翻译 :    bench-scale testing; pilot scale test; pilot test; scaled down experiment
• "压模试验" 英文翻译 :    penetrator test
• "印模试验" 英文翻译 :    sump test
• "冷模" 英文翻译 :    chill; chin-chin hardening; cold mold
• "船模试验水池" 英文翻译 :    experimental model basin; towing tank
• "动态船模试验" 英文翻译 :    dynamic ship model test
• "分段拼模试验" 英文翻译 :    segmented model test
• "静态船模试验" 英文翻译 :    static ship model test
• "拘束船模试验" 英文翻译 :    captive model test
• "约束船模试验" 英文翻译 :    constrained model test
• "自由船模试验" 英文翻译 :    free model test
• "模型试验,船模试验" 英文翻译 :    model experiment
• "自推试验(船模试验)" 英文翻译 :    self propulsion test
• "标准船模试验技术" 英文翻译 :    standard model testing technique
• "船模试验,船舱试压" 英文翻译 :    tank test
• "船模试验真空水池" 英文翻译 :    vacuum tank for ship models

• The simulated experiments of the driving force for natural cycle in self - cleaning evaporators
  自动清洗式蒸发器自然循环推动力的冷模试验
• The high efficient and saving - energy evaporators of fouling prevention and natural circulation
  自然循环自动清洗式蒸发器推动力冷模试验研究
• In order to measure the mixing characteristic , different temperature spout test method was used . the room air was used as main airflow and ofa
  为了较为准确地测量气流的混合特性，冷模试验采用了不等温射流方法。
• The cold model tests were completed on the mixing characteristics between the reburning airflow and main airflow or between ofa and main airflow in a cold model test - bed according to the practice situation of 6 # boiler in jianyou power plant in sichuan provice and the requirements of industrial tests for low nox reburning test project from state electric power company . the cold simulated experimental study included : 1
  针对四川省江油电厂6 #煤粉锅炉的实际情况,以及国家电力公司低nox再燃技术试验项目工业试验的具体要求，在一个四角喷燃煤粉锅炉冷模试验台上，对原型锅炉内再燃气流和燃尽气流( ofa )与主燃烧气流之间的混合特性进行了冷模试验研究。
• Different disposal style for the reburning air & burning out air ( tangential or front and rear walls ) and their disposal heights . 2 . different momentums of ofa ( under the condition of constant airflow of primary area and condition of constant flux inputted simulated boiler )
  冷模试验范围包括： 1 、再燃风和燃尽风的不同布置方式（切向布置和对墙布置） 、布置高度； 2 、不同燃尽风动量（炉内总进风量不变和燃烧器主气流不变两种情况） ； 3 、再燃风、燃尽风的不同组合与主气流之间的混合。
• Abstract : based on the react kinetics in the synthesis of chloromethane by the method of hydro - chlorinating methanol in gas - liquid phase and the experiment of cold mould , the technique parameters synthesizing chloromethane were defined . by using advanced process of refinement and condensation , the engineering level of synthesizing chloromethane was greatly enhanced
  文摘:通过对气液相甲醇氯氢化法生产氯甲烷的反应动力学及冷模试验的研究分析，确定氯甲烷合成的工艺参数，同时采用了先进的产品精制及冷凝技术，使氯甲烷生产水平产生了质的飞跃。