二相的的英文

• binary
• biphase
• biphasic
• diphase
• quarter phase
• quarter-phase
• two phase
• two-phase

• "二相"英文翻译    two-phase; diphase
• "的"英文翻译    4次方是 The fourth power of 2 i ...
• "二相变三相的接线法" 英文翻译 :    leblanc connection
• "二相" 英文翻译 :    [物理学] two-phase; diphase
• "把三相变为二相的斯柯特连接绕组" 英文翻译 :    scott connection winding
• "二相变三相的接线法勒布朗克接头" 英文翻译 :    leblanc connection
• "相的" 英文翻译 :    facial
• "二相；二相位" 英文翻译 :    phase, two
• "第二相" 英文翻译 :    second-phase
• "二相泵" 英文翻译 :    two-phase pump
• "二相法" 英文翻译 :    two-phase method
• "二相环" 英文翻译 :    two phase loop; two-phase loop
• "二相流" 英文翻译 :    two-phase flow
• "二相区" 英文翻译 :    two-phase area; two-phase region
• "二相系" 英文翻译 :    two-phase system
• "二相制" 英文翻译 :    biphase system; quarter phase system; tw-phase system; two-phase sysem; two-phase system
• "双相，二相" 英文翻译 :    diphase
• "准二相" 英文翻译 :    pseudotwophase
• "半相的" 英文翻译 :    half-phase
• "单相的" 英文翻译 :    homogeneous; monophase; monophasic; one-phase; single phase; two-wire; uniphase; uniphasic
• "倒相的" 英文翻译 :    inverse
• "等相的" 英文翻译 :    equal-phase; equiphase; isofacial; isophase
• "调相的" 英文翻译 :    phase modulated; phase-modulated
• "定相的" 英文翻译 :    phased
• "多相的" 英文翻译 :    heterogeneous; heterogenetic; heterophase; inhomogeneous; mesomorphic; multiphasic; nonuniform; nonhomogeneous; polyphase; polyphasic; poyphase

• A model for fracture toughness of high strength aluminum alloys containing second particles of various sized scales
  含有不同尺度量级第二相的高强铝合金断裂韧性模型
• The morphology of second phase in the alloy is not uniform if the alloy is preserved at the same temperature for the different time
  熔体经过不同时间的保温，合金中第二相的形态发生了较大的变化。
• The basic results include three aspects : the interests of lithium ionic conductors focused on the simple compounds , solid solution ( substitution by aliovalent and isovalent ) and the small composites which mostly are al2o3 as the second phase and some simple compounds as the matrix
  文献的基本结论是：对于锂离子导体的研究主要集中在单相化合物、固溶体(等价或异价取代)及少数以单一化合物为基、以al _ 2o _ 3等为第二相的复合体系。
• The research results show that , from the viewpoint of second phase morphologies , there exist quite differences between the grain - type materials ( such as wc / bcu brazing deposit material , wrs1000 and 1zt tungsten carbide strengthening overlaying material , as well as the wear - resistant material of polymer adhesive coating etc . ) , and the aggregation - type as well as dispersion - type ones ( such as zg35simn , wrd - 1 and khc - k2 depositing material ) in the wear - resistance and sand slurry abrasion mechanism . the sand slurry abrasion mechanisms are brought forward , of new wear - resistant materials with the features of grain - type second phase morphologies
  研究发现，与聚合型、弥散型第二相的材料(如zg35simn 、 wrd ? 1和khc ? k2熔敷材料等)相比，颗粒型第二相的材料(如wc bcu钎焊熔敷耐磨材料、 wrs1000型耐磨材料、 1zt碳化钨颗粒增强熔敷材料及ktc ? 1耐磨胶粘涂层材料等)在耐磨性能和磨损机理等方面均有不同，总结提出了以“颗粒型第二相”为特征的耐磨新材料泥沙磨损机理。
• Based on the analyses on mechanical properties , microstructure and fracture of - the microalloyed steels socrv with various heat treatment technique , it can be affirmed that various fractures arttribute to various mechanism , we can draw conclusion that the strength and toughness of microalloyed steels 50crv will be increase simultaneously by optimal heat treatment technique . to illustrate the mechanism of the strength and toughness of microalloyed steels socrv , we designed the comparative experiment and observed the microstructure of the sample which occurred at different quench and tempering temperature and different tempering time . the last experiment results were determined by the four factors : fined microalloyed elements grains , the decompound of martensite , martensite transformation of remnant austenite and the second phase precipitation
  为解释微合金化50crv钢强韧化机理，本文通过对不同淬火温度，回火温度，回火时间下的力学性能指标的对比及显微分析，认为微合金元素的细化晶粒，马氏体的回火分解，残余奥氏体的转变，第二相的沉淀析出共同决定了微合金钢的强韧化情况，特别是由于微合金元素的存在，其细化晶粒及其碳氮化物的沉淀析出，导致钢的良好的强韧性，并且如果工艺满足第二相的沉淀析出强化大于回火马氏体分解引起的软化效应，会在硬度曲线中产生明显的二次硬化现象。
• The questions the researcher concerned are which system will be chosen and how to obtain the good lithium ionic conductor materials , which is the basic departure of the paper . the addition of second phase in composite can change the interface structure and the conduction mechanism , improve the matrix conductivity and other function such as the sintering , crisping and so on , so the research of composites are an interesting field of the ionic conductors . the synthesis of lithium ionic conductor is often by solid state reaction , but this method needs high temperature and leads to the volatility of lithium which not only causes the drift of the compounds but gets the no well - distributed materials
  研究者所关注的问题是选择新的体系进行研究，以期得到性能更好的锂离子导体材料，这也正是本论文的基本出发点；复合离子导体中第二相的加入改善了基质的界面结构和导电机制，不仅可以提高基质材料的电导率，还可以在一定程度上改善材料的其它性能，如烧结性能、脆性和机械强度等。因此复合材料的研究是离子导体一个有广阔前景的发展方向；合成锂离子导体，特别是成分复杂的体系以传统的固相合成法为主，但这种方法需要较高的温度，容易引起锂的挥发，从而造成产物组成的偏移，而且不易得到显微结构均匀的材料。