二次冷却的英文

发音:

"二次冷却"怎么读用"二次冷却"造句

英文翻译手机版

aftercooling
recooling
secondary cooling

"二次"英文翻译 secondary; quadratic
"冷却"英文翻译 cool off
"二次冷却剂" 英文翻译 : secondary coolant
"二次冷却器" 英文翻译 : after cooler; aftercooler; recooler; secondary cooler
"二次冷却区" 英文翻译 : secondary cooling zone; secondary zone
"二次冷却室" 英文翻译 : secondary cooling chamber
"二次冷却塔" 英文翻译 : recooling tower
"再冷却；二次冷却" 英文翻译 : recooling
"二次冷却回路" 英文翻译 : secondary coolant circuit
"二次冷却空气" 英文翻译 : secondary cooling air
"二次冷却系统" 英文翻译 : secondary cooling system
"梁式二次冷却" 英文翻译 : beam type secondary cooling
"二次冷却带区段" 英文翻译 : section of cooling zone
"二次冷却带下部" 英文翻译 : lower spray section
"弧形二次冷却区" 英文翻译 : curved secondary cooling zone
"喷射法二次冷却" 英文翻译 : jet-type secondary cooling
"水二次冷却系统" 英文翻译 : waterrecoolingsystem
"再（次）冷（却），二次冷却" 英文翻译 : aftercooling
"后冷却器二次冷却器" 英文翻译 : aftercooler
"二次冷凝器二次冷却器再冷凝器" 英文翻译 : after-condenser
"连续喷雾二次冷却区" 英文翻译 : continuous spray cooling zone
"次冷却" 英文翻译 : secondary cooling
"二次冷冻剂" 英文翻译 : secondary refrigerant; secondaryrefrigerant
"二次冷凝器" 英文翻译 : after condenser; aftercondenser; secondary condenser
"二次冷区" 英文翻译 : secondary cooling zone

例句与用法

The numerical simulation commercial software for secondary cooling process in billet continuous casting
方坯连铸二次冷却数值仿真商用软件
( 2 ) on the leading edge , the film cooling effectiveness at the zone immediately downstream of the cooling holes is affected by blowing ratio and mainstream reynolds number , while the effects are not important in the downstream zone far from the cooling holes . ( 3 ) on the front half of pressure surface , the effectiveness increases with decreasing blowing ratio at the downstream near the cooling row and it is contrary at the downstream far from the cooling row . ( 4 ) on the rear pare of the pressure surface , the effectiveness decreases with increasing blowing ratio and does not vary so much downstream in the cases of higher blowing ratio
研究结果表明叶片吸力面端壁附近区域压力系数分布呈现出较强的三维特性，动叶吸力面尤其明显；气膜孔流量系数随吹风比的增加而增大，在高吹风比情况下，流量系数逐渐趋于常数；在不同型面区域，冷却效率分布有较大的差异，而且吹风比与主流雷诺数的影响程度也不尽相同；低吹风比下，孔出口下游附近可以得到较好的冷却，中、高吹风比下，冷气射流在加速流动主流的作用下返回壁面进行二次冷却，孔下游较远区域可以得到较好的冷气覆盖。