中断处理程序的英文

• interrupt handler
• interrupt handling program
• interrupt handling routine
• interrupt processing routine
• interruption handling program
• interruption handling routine

• "中断"英文翻译    suspend; break off; disconti ...
• "处理"英文翻译    deal or cope with
• "程序"英文翻译    procedure
• "中断处理程序；中断处理器" 英文翻译 :    handler interrupt; interrupt handler
• "丢失中断处理程序" 英文翻译 :    missing interruption handler
• "二级中断处理程序" 英文翻译 :    second-level interrupt handler slih
• "光笔中断处理程序" 英文翻译 :    light-pen interrupt handler
• "一级中断处理程序" 英文翻译 :    first-level interrupt handler
• "遗漏中断处理程序" 英文翻译 :    missing interruption handler
• "操作员外中断处理程序" 英文翻译 :    operation external interrupt processor; operator external interrupt processor; operatorexternalinterruptprocessor
• "诊断处理程序" 英文翻译 :    deagnostic processor; diagnostic processor
• "由与该中断级别相关的一级中断处理程序" 英文翻译 :    flih
• "操作员外中断处理程度" 英文翻译 :    operator external interrupt processor
• "算后检查和诊断处理程序" 英文翻译 :    postmortem and diagnostic processor
• "栈中断处理" 英文翻译 :    stack interrupt process
• "中断处理" 英文翻译 :    interrupt handing; interrupt handling; interrupt proce ing; interrupt processing
• "中断处理机" 英文翻译 :    basic interrupt processor
• "中断处理器" 英文翻译 :    handler interrupt
• "中断处理分时" 英文翻译 :    time sharing interrupt processing; time sharing interrupt schemes
• "中断处理逻辑" 英文翻译 :    interrupt handling logic
• "处理程序中断服务区" 英文翻译 :    handler interrupt service section
• "雏菊炼中断处理法" 英文翻译 :    daisy chain interrupt
• "公用中断处理模块" 英文翻译 :    common interrupt processing module
• "异常和中断处理" 英文翻译 :    exception and interrupt handling
• "管理程序中断" 英文翻译 :    supervisor interrupt

• The interrupt handler is part of the orinoco module and interacts with the linux networking stack
  中断处理程序是orinoco模块的一部分，并与linux网络栈交互。
• If your timing requirements are modest , a simple task , or even interrupt routine , might well be more efficient in both code space and processor cycles
  如果你的定时要求适当，一个简单的任务，甚至是中断处理程序，可能在代码空间和处理周期上都更加有效。
• And this thesis also analyzed the characteristics of packet receiving interrupt handler and it ' s max interference on the other tasks on the same processor with lower priorities
  此外本文还分析了报文接收中断处理程序的时间特性和它对节点上其它任务最大响应时间的影响。
• This driver module includes implementation of addressing encoder end ’ s internal register , reading encoded data from the encoder end and the interrupt handler of the encoder end
  整个驱动模块实现了对编码端内部各寄存器的访问,从编码板读取编码数据和预览数据,以及编码系统中断处理程序等功能。
• The software has been programmed with c . sensorless pmsm dual close - loop vector control with feedback of speed and current are realized . the flow charts of main program and pwm interrupt service routine are given
  软件采用c语言编写,实现了无位置传感器控制算法及转速和电流双闭环矢量控制;给出了系统主程序和pwm中断处理程序流程图。
• Summarily this thesis studied and realized the highly demanding hardware board interrupts handling and the communication between network application part and the hardware interrupt handling routine under the windows 98 platform
  通过以上这些叙述,本文研究并实现了通用板卡在windows98平台下的高实时性中断处理以及网络应用部分与中断处理程序的通信。
• Secondly , the paper discusses the way and tools to develop the windows driver , then implements a driver program arms to the pci interface . in the program , some subprograms are implemented . some special technologies used in the driver are introduced in this section
  接着详细论述了windows下设备驱动程序开发工具的选择和使用方法，针对课题中开发的pci接口的采集卡给出了一个windows下的设备驱动程序，分别描述了各个例程和中断处理程序的实现方法，以及设备驱动程序设计中采用的一些特殊技术。
• As the operating system of ipc is windows and the data processing partial timeliness requirement is highly demanding , how to achieve the highly demanding hardware board interrupt handling under the windows platform and the communication between network application part and the hardware interrupt handling routine is key research content of this article
  由于工控机采用windows操作系统,而且数据处理部分实时性要求很高,如何在windows平台下完成硬件板卡的高实时性中断,以及实现网络应用与硬件中断处理程序的通信就是本文重点研究的内容。
• This text introduced the work patterns and register structure of 80386 processors in detail at first , latterly expounded especially the hardware interrupt handling of windows 98 with the course to the kernel of windows 98 ; then recommended the framework of realization of highly demanding hardware board interrupt handling by revising idt to intercept interrupt handling at hardware layer , subsequently introduced the application and development of vxd technology to achieve interrupt handling overall all situations under the windows 98 platform ; finally introduced the b / s pattern network application development part of this topic , specifically introduced the jsp technology system , elaborated the communication between network application part and the hardware interrupt handling routine combined with the jni technology , and provided partial important program and corresponding commentary
  本文首先详细介绍了80386处理器的工作模式和寄存器结构,接着对windows98的内核进行了相关分析,重点介绍了windows98的硬件中断处理过程;随后介绍了通过修改中断向量表以实现在硬件层截获中断来实现高实时性处理的框架,又介绍了windows98下虚拟设备驱动vxd技术的应用与开发,以及中断全局处理的实现;最后介绍本课题的b / s模式网络应用开发部分,具体介绍了jsp技术体系,并结合jni技术阐述了网络应用与硬件中断处理程序的通信,并给出部分关键程序及其注释。
• After that , i put forward the scm platform based develop solution of the single channel ip phone gateway and discribe the develop hardware platform , software platform and compile tools . i also design the applications software and divide it into several different modules . then i particularly introduce the design and realization of the mainly control module , interrupt dispose module , sdram driver module , nework task dispose module , address transfer module , phone task dispose module and other peripheral equipment driver module
  本文首先介绍了ip电话技术及其相关协议；然后分析了ip电话网关在voip网络中的工作原理，比较了其几种可行的实现方案，提出了在单片机平台下开发单线ip电话网关的具体方法，介绍了系统的总体方案，完成了硬件设计选型和软件总体设计和模块划分；接着，介绍了软件开发工具和现有的底层库函数，并对主控程序、中断处理程序、 sdram驱动、网络任务处理、地址映射、电话任务处理、其他外围设备驱动等各个应用软件模块的设计与实现进行了详细的介绍；最后，说明了实验软件的测试结果及今后改进的构想。