世界坐标系的英文

• world coordinate system (wcs)

• "世界"英文翻译    world; global; earth
• "世界坐标系统" 英文翻译 :    wcs world coordinate system
• "对齐世界坐标系" 英文翻译 :    align to world
• "场景采用世界坐标系" 英文翻译 :    world coordinates
• "世界坐标" 英文翻译 :    wc world coordinates
• "世界坐标学" 英文翻译 :    world-coordinate system
• "对齐世界坐标" 英文翻译 :    align to world
• "讲世界坐标系作为约束目标" 英文翻译 :    add world target
• "坐标系" 英文翻译 :    coordinate axis system; coordinate frame; coordinate system set of coordinates; coordinates system; coordinatesystem; coordination system(axi ystem); coordination system(axissystem); csys; frame of axes; koordinatensystem coordinate system; photogrammetric coordinate system; reference of axes; system of coordinates; ucs
• "坐标制, 坐标系统" 英文翻译 :    coordinated system
• "坐标制，坐标系统" 英文翻译 :    coordinate system
• "板坐标系统" 英文翻译 :    table coordinates
• "北京坐标系" 英文翻译 :    beijing corrdinate system
• "标准坐标系" 英文翻译 :    conventional coordinates
• "彩色坐标系" 英文翻译 :    color coordinate system; colorcoordinatesystem
• "参考系，坐标系" 英文翻译 :    reference frame
• "参考坐标系" 英文翻译 :    frame of reference; rcs (reference coordinate system); reference axes system; references coordinate system
• "参照坐标系" 英文翻译 :    frame of reference
• "草图坐标系" 英文翻译 :    scs
• "测地坐标系" 英文翻译 :    geodesic coordinate system; system of geodesic coordinates
• "赤道坐标系" 英文翻译 :    equatorial coordinate system; equatorial system; equinoctial coordinate system
• "大地坐标系" 英文翻译 :    earth coordinates; geodetic coordinate system; geodetic coordinates; geodeticcoordinatesystem; world coordinate system
• "弹丸坐标系" 英文翻译 :    projectile coordinate system
• "导弹坐标系" 英文翻译 :    missile axes; missile-based coordinate system
• "地方坐标系" 英文翻译 :    local coordinate system

• In this instance , the location of camera in the world coordinates is unnecessary to calibrated , and the rotary matrix and horizontal movable matrix is needless too
  这种情况下不需要标定摄像机在世界坐标系的位置，相对的对于世界坐标系的旋转矩阵和平移矩阵也不需要。
• At last the relatively attitude can be measured by the transformation between vehicle body coordinate system and the world coordinate system of n light points . the algorithm can be confirmed by the result of simulation
  最后利用n个光点在车体坐标系和世界坐标系下的坐标转换,解出月球车的相对姿态,并给出了仿真结果。
• The robot can gain the accurate localization value consisting of position and orientation in the world coordinate system using the robot ’ s self - localization method based on the information of mark lines and the monte carlo localization method the thesis designs
  使用本文设计的基于标志线信息的机器人自定位方法和montecarlo定位方法,机器人能够得到其在场地世界坐标系中的较为精确的位置、朝向等定位结果。
• In the end the paper puts up the experiment analysis about the geometrical parameter measuring system . fistly it introduces the experimet of camera calibration and gives several calibration results basing on different world coordinate system . then measuring some objects by use of the calibration results . the paper gives these measuring results and analysis
  最后论文对几何量测量系统进行了实验分析。首先介绍了定标实验，并给出了几组在不同的世界坐标系下的定标结果，然后利用这些定标结果对物体进行测量计算，并对测量结果进行分析。
• Then opengl graphic libraries are introduced to realize the 3 - d visualization . the process of 3 - d observation is detailedly studied and the transformation formulation of world coordination system and screen coordination system is listed . it ' s the foundation of 3 - d interaction and actualization of 3 - d measurement results
  本文详细研究了三维观察的具体过程，推导了三维物体世界坐标系和设备(屏幕)坐标系之间的转换关系，为三维交互技术的实现和三维测量结果的真实化奠定了基础。
• The vision system and sonar system of hebut - 1 mobile robot is designed . the model of camera and the conversion from obstacle image coordinate into the world coordinate is completed , which the information of obstacle is converted into camera coordinate . therefore the different coordinate are unified . experiment on segmentation are done and a method of image segmentation based of his color threshold is used for mobile robot ' s obstacle image segmentation
  设计了hebut -型移动机器人视觉系统和声纳系统。建立了移动机器人的摄象机模型，从而完成了世界坐标系到摄象机坐标系的转换，使障碍物信息成功地转换到摄像机坐标系，完成了不同坐标系之间的统一。
• If the location of calibration block is changed , and several computation is processed toward different coordinates every time , the internal parameters such as uo , vo , f , d will not change . through lots of times calibration , the result is averaged , the precise result will be obtained . after the pretreatment , an image easy to recognize and understand for computer is produced
  这样变动标定块在世界坐标的位置，在进行几次标定计算，每次虽然相对于不同的世界坐标系，但对于不变的同一个系统，内部参数u 、 v 、 f ，摄像机之间的距离d ，都不会变化，这样通过多次标定后，将结果进行加权求平均，可得到精确的结果。