polymerization造句

• In a tower reactor polymerization may be carried out in two zones .
  塔式反应器中聚合可分为两段进行。
• A hardening agent mixed with the monomer will induce polymerization .
  固化剂与这种单体混合将引起聚合反应。
• It is the reverse of the propagation step in addition polymerization .
  这一过程是加聚反应历程中链增长步序的逆过程。
• Anhydride-type curing agents require the application of heat to promote polymerization .
  酸酐类固化剂则要求加热以促进聚合反应。
• For this reason such reactions are frequently termed condensation polymerizations .
  根据这个理由，常常把这种反应定义为缩合聚合。
• Ketenes, notably dimethyl ketene, readily undergo oligomerization and polymerization .
  烯酮，特别是二甲基烯酮，很容易齐聚和聚合。
• The particles are preferably prepared by the limited coalescence polymerization technique .
  这种颗粒，最好由有限聚结聚合技术来制备。
• Antifreeze agents are necessary in emulsion polymerizations carried out at low temperatures .
  当在低温下进行乳液聚合时需要加入抗冻剂。
• In general ionic polymerization can be initiated through acidic or basic compounds .
  一般来讲，离子型聚合可以被酸类或碱类化合物所引发。
• It is not surprising to find that the observed order in monomer for the polymerization exceeds unity .
  在聚合中发现单体的反应极数大于1是不足为奇的。
• In the polymerization systems studied, segmental rearrangement is the important rate-determining phenomenon .
  在已研究过的聚合体系中链段重排是重要的速度决定步骤。
• With large amounts of monomer, bulk polymerization often takes very turbulent and even explosive form .
  用大量的单体进行本体聚合，其反应常是十分激烈甚至是爆炸式的。
• Impurities that promote deterioration of polymers can be foreign materials, such as residues from polymerization catalysts .
  促使聚合物劣化的杂质可能是外加的物质，如残存的聚合用催化剂。
• Depending upon reaction conditions, the product may be a polyketone formed b y addition polymerization of the ketene double bond .
  随着反应条件的不同，产物可以是由烯酮的双键加成聚合得到的聚酮。
• Reports in the literature suggest that these derivatives can initiate various types of polymerizations in suitable circumstances .
  文献中的报道指出，这些衍生物在适宜的条件下可以引发出多种聚合反应。
• The arrangement of the monomers-controllable during the polymerization process-gives the material the characteristics we need .
  在聚合过程中进行人为控制，使单体的排列方式能给出人们所需要的材料特性。
• Study of ldpe nvp system surface grafting polymerization
  体系表面光接枝聚合研究
• Modeling of polymerization of vinyl acetate
  醋酸乙烯聚合反应过程数学模型的建立