连铸坯的英文

• continuously cast bloom

• "连"英文翻译    link; join; connect
• "铸坯"英文翻译    casting blank
• "大断面连铸坯" 英文翻译 :    heavy section
• "连铸坯热装热送" 英文翻译 :    hot loading and hot feeding of continuous casting blanks
• "连铸坯输出辊道" 英文翻译 :    casting discharge conveyer
• "连铸坯直接轧制" 英文翻译 :    direct strand reduction
• "铸坯" 英文翻译 :    casting blank◇铸坯导架 strand guide
• "连铸" 英文翻译 :    cc dr process; continuous casting direct rolling process; o continuous casting
• "扁铸坯" 英文翻译 :    cast slab
• "负速铸坯" 英文翻译 :    negative strip
• "活塞环铸坯" 英文翻译 :    piston ring casting
• "陶器铸坯" 英文翻译 :    pottery casting
• "弯曲铸坯机" 英文翻译 :    bender
• "铸坯导架" 英文翻译 :    strand guide
• "铸坯底部" 英文翻译 :    bottom of the casting
• "铸坯轧压" 英文翻译 :    strand reduction
• "连铸比" 英文翻译 :    cc ratio; continuous casting ratio
• "连铸法" 英文翻译 :    continuous casting process; continuous metal cast process
• "连铸钢" 英文翻译 :    continuously cast steel
• "连铸机" 英文翻译 :    conticaster; continuous caster
• "全连铸" 英文翻译 :    sequence casting
• "陶瓷器铸坯法" 英文翻译 :    pottery casting
• "八流连铸机" 英文翻译 :    eight-strand continuous casting machine
• "板坯连铸机" 英文翻译 :    slab caster; slab casting machine
• "薄带连铸机" 英文翻译 :    stricaster

• Study of scale mark on surface of hot rolling continuous casting
  连铸坯热轧板材表面麻点形成研究
• Solidification process simulation system for the spiral continuous cast ing slab
  螺旋连铸坯凝固过程仿真系统的开发
• A control technique of continuous - casting slab length measurement based on vc and image processing
  和图像处理的连铸坯定尺控制技术
• The development of modern continuous casting is mainly aiming at improving the yield and quality of continuous casting slabs
  现代连铸的发展主要着眼于提高连铸坯的产量和质量。
• The paper put forward a new model and tendency of rolling plate which adopt the medium thickness casting billet and the modern steckel mill
  进而指出，中等厚度的连铸坯与现代炉卷轧机组合的成卷轧制中厚板的生产模式，是今后中厚板生产发展的一种新模式和方向。
• In this paper , the internal transverse cracks of continuous casting slabs of a niobium - bearing peritectic grade of steel are investigated using electron probe microanalyser and optical microscope
  摘要连铸坯厚度中心存在的内裂纹在后续的轧制过程中轧不合而对产品的质量带来重大的影响。
• The analysis by sampling data of no . 2 caster bao steel shows that the integrated heat transfer coefficient is independent of the width of slabs , and the effect of superheat is not clear , but the effect of casting speed is very obvious
  摘要对宝钢2号连铸机现场数据的采样分析结果表明：连铸坯在线宽度对结晶器综合传热系数没有影响。
• Though we want to get the optimized values of the unknown controlling parameters in cc process through the surface temperature of the billet , the direct solution is difficult . of course , those unknown parameters have close relation with the surface heat flux of the billet
  由于这些待辨识的工艺参数是与连铸坯的表面热流有着密切的关系，所以需要首先利用连铸坯的表面温度测量值来计算出连铸坯的表面热流，然后再辨识出未知的工艺参数。
• Thermal and structure character of straight reheating furnace were analyzed in csp technological process . coupling with heat conduction differential equations of the thin slab and the furnace lining , the mathemat ical model of heat transfer is established in the long one dimension furnace by using zone method for making the model of radiant heat transfer . the effect of the moving velocity and kinds of the slab on temperature distribution in the furnace is discussed based upon the solutions to the mathematical model
  通过分析csp工艺中直通式辊底加热炉的热工及结构特性，采用区域法建立炉内辐射换热数学模型，与加热炉内连铸坯及炉衬的一维导热方程相耦合，建立长一维直通式辊底加热炉炉内传热数学模型.通过对数学模型的求解，研究分析了不同的薄板坯移动速度及钢种对加热炉炉内温度分布的影响
• Steel casting : 20 tons arc - furnace steelmaking , 40tlf refiner furnace ; the max elevating capacity 125t ; the max casting products 80t , dimension of casting products length , width , high 8 . 54 . 53m , spun casting min outer diameter , min wall thickness , max length 1000154000mm ; various specification steel strands
  铸钢: 20t电弧炼钢炉40tlf精炼炉最大起重能力125t最大铸钢件80t铸钢件最大尺寸长宽高8 . 54 . 53m离心浇注最大外径最小壁厚最大长度1000154000mm各种规格连铸坯。