表面测量的英文

• surface measurement

• "表面"英文翻译    surface; superficies; bounda ...
• "测量"英文翻译    survey; measure
• "表面测量仪" 英文翻译 :    face measuring instrument; profile meter; surface measuring i trument; surface-measuring instrument
• "自定心内表面测量仪" 英文翻译 :    self-centering internal measuring instrument
• "地面测量；水面测量" 英文翻译 :    surface measurement
• "比表面测定" 英文翻译 :    specific surface determination
• "表面测绘点" 英文翻译 :    surface mapoint
• "表面测试" 英文翻译 :    suface test
• "表面测温计" 英文翻译 :    surface thermometer
• "大平面测量" 英文翻译 :    measuring for magnetic filed with large plane
• "地面测量" 英文翻译 :    ground surveying; groundsurvey; terrestrial survey
• "地面测量法" 英文翻译 :    ground survey method; groundsurveymethod
• "断面测量" 英文翻译 :    cross-sectional surveying; profile leveling, cross-section leveling; range survey
• "断面测量仪" 英文翻译 :    bottom profiler
• "横断面测量" 英文翻译 :    cro -sectio urvey; cross levelling; cross section survey; cross-leveling; cross-section survey; cross-sectional survey; cross-sectioning; cross－section survey
• "截面测量" 英文翻译 :    section gauge
• "平面测量" 英文翻译 :    plan survey; plane of survey; plane surveying; planimetering; planimetry; surface measurement
• "平面测量法" 英文翻译 :    planimetric method
• "平面测量图" 英文翻译 :    planimetric map
• "平面测量仪" 英文翻译 :    face measuring instrument
• "剖面测量" 英文翻译 :    profile leveling; profile survey
• "剖面测量仪" 英文翻译 :    profile measuring i trument; profile measuring instrument; profiler
• "曲面测量法" 英文翻译 :    cyrtometry
• "曲面测量剂" 英文翻译 :    kyrtometer
• "曲面测量计" 英文翻译 :    curtometer; cyrtometer; kyrtometer

• Must have working knowledge of cmm , micro - height , hardness tester , surface gage , calipers , and additional equipment
  必须有关于cmm ，高度测量，硬度测试，表面测量，齿轮等设备知识。
• It is appropriate for measuring end temperature of bearing liner or other works , e . g . , push bearing liner of steamer , supporting bearing liner or push bearing liner of electromotor main axis , bearing liner of coal pulverizer , bearing liner of high efficient feed water pump , bearing liner of compression machine and kinds of other objects inpetrochemical plant
  适用于测量轴瓦或其它机件的端面温度，如：汽轮机推力轴瓦，电机主轴支持瓦推力瓦，磨煤机大瓦和高效给水泵轴瓦石油化工厂压缩机轴瓦和各种机件物体的表面测量。
• On the one hand , the definition of meter can be trace to the source via the step height in the surface measurement technology ; on the other hand , the problems of measurement of step height occur almost everywhere in the industrial domain that relies mainly on semiconductor manufacturing
  表面台阶高度测量在表面计量学中有十分重要的作用。一方面,表面测量技术通过台阶高度可以溯源到米的定义;另一方面,半导体制造业为主的工业产业中涉及大量的台阶高度的检测问题。
• To eliminate or lessen the system errors caused by the offset and slope of the thin aluminum sheet when measuring its surface , and to avoid over - cutting while machining the honeycomb surface , the saddle - point programming is applied to the position optimization of the theoretical surface . to generate the cnc program of the honeycomb sandwich , the equidistant calculation of the actual surface is produced and the data processing software is developed
  利用鞍点规划方法优化理论椭球面的位置，使实测曲面相对理论椭球面的最大法向误差达到最小，减少或消除了蒙皮内表面测量时由于定位的偏心或歪斜引起的系统误差，使误差均化，防止了配对加工蜂窝夹芯表面时少切或过切现象的发生。
• As one of the most potential experimental stress measurement , ultrasonic technique was widely developed and applied in recent years . limited by their own characters , bulk wave and surface wave in ultrasonic frequency are difficult to be used to measure the internal tangent stress condition from the surface of medium . in many occasions , they will not be able to evaluate the working condition of mechanical components effectively
  超声波技术作为最有潜力的实验应力测量技术之一,近年来得到了广泛的发展和应用,然而超声体波与表面波由于其自身的限制性,均无法从表面测量内部的切向应力状况,在许多场合下无法有效进行机械构件工作状态的评估。