球化现象的英文

• spheroidization

• "球"英文翻译    sphere; globe
• "化"英文翻译    change; turn; transform
• "现象"英文翻译    appearance; phenomenon
• "矮化现象" 英文翻译 :    dwarfism
• "白化现象" 英文翻译 :    albinism
• "春化现象" 英文翻译 :    vernalization
• "催化现象" 英文翻译 :    catalytic phenomenon
• "带化现象" 英文翻译 :    fasciation
• "短头化现象" 英文翻译 :    brachycephalization
• "光化现象" 英文翻译 :    photochemical phenomenon
• "红化现象" 英文翻译 :    rutilism
• "黄化现象" 英文翻译 :    aetiolation; blanching; ctiolation; eitolation phenomenon; xanthochroism; yellowing
• "极化现象" 英文翻译 :    polarization phenomena
• "僵化现象" 英文翻译 :    mummification
• "进化现象" 英文翻译 :    evolutionary phenomena
• "空化现象" 英文翻译 :    cavitation phenomena
• "老化现象" 英文翻译 :    ageing phenomenon; catabiosis; deterioration phenomenon
• "老化现象(模砂)" 英文翻译 :    deterioration phenomenon
• "硫化现象" 英文翻译 :    sulfation
• "男性化现象" 英文翻译 :    virilism
• "贫养化现象" 英文翻译 :    oligotrophication phenomena
• "歧化现象" 英文翻译 :    diauxy
• "趋化现象的" 英文翻译 :    chemotactic
• "趋化现象地" 英文翻译 :    chemotactically
• "乳化现象" 英文翻译 :    emulsion

• At the same time , low - temperature superheater keeps on running under the high temperature for long time , microstructure appears globular carbide configuration , and bearing capacity of materials at high temperature declines
  同时，低温过热器长期高温运行，组织已出现珠光体球化现象，管材高温承载能力降低。
• During the laser sintering , due to the large liquid phase viscosity and surface tension , the balling effect occurred when the molten did not wet the solid metal particle and the underlying substrate
  实验发现，在液相粘度较高、表面张力大，熔体材料不浸润固相颗粒和基板等因素的影响下，烧结过程中出现了球化现象。
• The simulation results suggest that , at the end of the scanning line , the dissymmetric temperature field and the great temperature gradient result in the balling phenomenon and great thermal stress , which could lead to the destruction of the sintering samples in this region . because of the coupling effect between scanning lines , the balling phenomenon is increased as the increase of the scanning lines , thus the over short scanning lines should be avoided in the sintering process . different scanning strategies have significant influence on the sintering
  模拟结果表明,扫描端点温度场的不对称及较大的温度梯度造成了端点球化现象,并在端点处产生较大的热应力,使烧结成形试样易在此处破坏;激光扫描线间的耦合作用使端点球化现象随扫描线的增加而逐渐显著,烧结时应避免过短的扫描线;不同扫描策略对烧结成形有很大影响,交替扫描会影响烧结试样的质量,实际制造时应采用单向扫描策略。