This machine of horizotal crushing structure , and the material is fed into the crushing chamber through a hopper , crushed by cutting and impact of both fixed and rotating knives , and flows to the exit automatically under the effect of rotating centrifugal force 本机为卧式粉碎结构，物料由粉碎机料斗进入粉碎室，利用旋转刀与固定刀冲击、剪切而获得粉碎，经旋转离心力的作用，物料自动流向粉碎机出口处。
Based on the theory of bekker , this paper also analyzes the process of steering on flat ground and on a slope . this paper also considers the centrifugal force and the air resistance when tank is driving at middle or high speed 在分析坦克所受外力作用时，考虑了履带的滑动和横摆角，并且根据bekker的理论，分别讨论了坦克在水平面和斜坡上的转向过程，在分析过程中，充分考虑了坦克高速转向时的离心力的影响。
Sg three column manual bottom discharge type of centrifuge by scraper automatically is the basic type of centrifuge for solid liquid separation . it contains basket which is dynamically balanced in which a filter bag is placed which retains the solid within the basket . the arrangement for the discharge of the solid cake is provided at the bottom which is done by scraper automatically 被分离的悬浮液从顶部加料管进入转鼓，落在布料盘上，在离心力的作用下，流向转鼓壁，液相经转鼓壁上的滤网与滤孔抛向机壳空间，汇集在底盘内，经排液管排出，而固相存留在滤布的内侧。
The series equipment versatillty , its performance had achieved the international advanced level , is at present is most effective , the practical reliable crushed stone machine , is suitable specially for the manufacture grinding compound , fireproof the matreial , the cement , the quartz sand , the emery , the stove are cut broken glass the power , the copper ore , the concrete aggregate and so on many kinds of , the crisp materials on the control granulated substance machine energy conserva tion 50 % , is in the present world system qranulated substance equipment 物料由机器上部垂直落入高速旋转的叶轮内，在高速离心力的作用下，与另一部分以伞状形式分流在叶轮四周的物料产生高速撞击与粉碎，物料在互相撞击后，又会在叶轮和机壳之间以物料形成涡流多次的互相撞击、摩擦而粉碎，从下部直通排出，形成闭路多次循环，由筛分设备控制达到所要求的成品粒度。
This machine is of hammer type high speed crusher , material is fed into the crushing chamber by a hopper through screw conveyor and crushed by high speed rotating hammer , the crushed material is entered into the catcher automatically under the effect of rotating centrifugal force , and the dust is filtered and recovered by dust collector through a bag 本机为锤式高速粉碎机,物料由料斗经螺旋输送杆进入粉碎室,被高速旋转的锤子击碎,而获得粉碎,粉碎好的物料经旋转离心力的作用,自动进入捕集袋,粉尘由吸尘箱经布袋过滤回收。
This machine is of vertical crushing structure , and the material is fed into the crushing chambezr through a hopper , crushed by simultaneous cutting of both fixed and movable knives and rotating impact of rotating knife , and entered into the catcher automatically under the effect of rotating centrifugal force , and the dust is filtered and recovered by dust collector through a bag 本机为立式粉碎结构,物料由进料斗进入粉碎室,利用旋转刀的旋转冲击,固定刀和活动刀同进剪切而获得粉碎,粉碎好的物料经旋转离心力的作用,自动进入捕集袋,粉尘由吸尘箱经布袋过滤回收。
Firstly , based on n - s equation , the momentum differential equation （ contained centrifugal force ） is derived by simplification in boundary layer and then integrates the differential equation over the thickness of the boundary layer , the momentum integral equation is deduced . the dimensionless centrifugal factor is introduced , then the solution of the momentum integral equation is obtained . the dimensionless group is introduced to determined separation of boundary layer 本文首先根据粘性流体力学的一般方程，通过在边界层内进行量级比较，在所限定的范围内得到了含有离心力的边界层动量微分方程并给出其满足的边界条件，然后对该微分方程在边界层内积分得到离心泵叶轮边界层动量积分方程，在求解过程中引入了无量纲离心因子，并作了相应合理的假设，得出积分方程解的一般表达式，并引入以边界层动量损失厚度为主要特征量的无量纲参数对边界层分离进行评价。
During its operation , the rotor of the machine is always under the great suppression of centrifugal force . the surface of rotor is the most important part to enduring the forces and thermal energy . so the windings of rotor are in a common problem of happening one - point to earth short fault , two - point to earth short fault , or turn - to - turn short fault 汽轮发电机是一种高速隐极式同步电机，在其运行时，转子受到强大的离心力的作用，而转子表面是承受机械应力和发热的最关键的部件，因此汽轮发电机转子绕组容易发生一点接地、匝间短路和两点接地短路故障。
