熔盐

• Feasibly experimental projects of fabricating buried waveguides by field - assisted ion - exchanged technology using this equipment were designed . used thermal ion - exchange and the silver film ion - exchange technology , the planar and channel waveguides were fabricated
  在实验室允许的条件下,采用ag膜电场辅助离子交换和熔盐离子交换法对铒镱共掺磷酸盐玻璃平板波导和沟道波导进行了制作。
• Some main apparent factors involved in the dissolution and deformation process , such as melts composition , atmospheres and temperature etc have been studied , but the reiated details and further experimental evidences in a molectliar ievel are absent and difficult to be obtained at present
  ( 2 )关于nio阴极溶解机理的探讨也基本局限在宏观而间接的研究阶段，主要涉及熔盐组成、气氛组成和温度等宏观影响因素，同样缺少直接的、分子水平的实验数据。
• The process of in situ synthesis in salt activated by ma is discussed , and the separation of activation and reaction during ma is investigated . the ti - c mixtures with elevated system energy from mechanical activation occur due to thermal activation from in salt bath
  在“机械激活盐浴合成”工艺中，将高放热体系在普通反应研磨工艺中所存在的孕育期与反应期分离，利用初始ti - c混粉在孕育期中所积累的储存能和高温熔盐反应介质所提供的热激活作用来促发粉体中的合成反应。
• This paper is concentrated on preparing si3n4 / sic , si2n2o / sic and o ' - sialon / sic by reactive sintering techniques . the components of raw materials and microstructure of these three ceramics were studied . at the same time , molten al , cu , zn , mg and cryolite corrosion resistance of silicon nitride bonded silicon carbide were tested too
  本论文通过成份及微结构设计，采用反应烧结工艺制备了力学和抗氧化性能优异的o ' - sialon sic 、 si _ 2n _ 2o sic和si _ 3n _ 4 sic陶瓷材料，并研究了它们的抗铝、铜、锌、镁有色金属熔体及冰晶石熔盐侵蚀性能。
• In conclusion , the application of wilson equation to the calculation of thermodynamic properties of al - based liquid alloys succeeds and a foundation for the theoretical analysis of both the electrolysis and electrorefming of aluminum metallurgy and the development and calculation of process design of al - based alloys is provided
  Wilson方程在铝基液态合金热力学性质计算中的应用取得了成功，为铝冶金的熔盐电解和原铝净化以及铝基合金的研究开发和工艺设计计算提供了理论分析依据和指导。
• This work emphasized the syntheses of perovskite templates ( including srtio3 and baho3 ) . batio3 were prepared by molten salt synthesis ( mss ) . scanning electron microscopy ( sem ) and x - ray diffraction patterns ( xrd ) revealed that there was no aggregation with batio3 powders and spherical particles of batio3 was obtained by mss
  本论文用熔盐法合成batio _ 3 ，通过xrd物相分析和sem形貌分析，可以得到如下结论：用熔盐法合成的batio _ 3粉体基本无团聚，显微结构为球形颗粒。
• ( 3 ) despite of many studies on oxidationjlithiation of porous nickel , a very important factor abstract has not been pay much 8ttedion to , that is , most of the matcria [ s in mcfc actually work under a ioad generated by the self weight of mcfc stack , which undoubtedly has a great effect on the materials performance in mcfc
  ( 3 )尽管近些年来，对于金属ni在熔盐中的氧化锂化行为已进行了相当深入的研究，但是有一个很重要的因素却未被关注。即， mcfc电池堆中的电极材料在实际启动和运行过程中总是处于由电池堆自身产生的负荷状态，负荷的存在无疑对电极材料的性能产生不容忽视的影响。