And how to improve the wetting of ceramics by liquid metals has great significance to the preparation of high performance ysz - ni cermets 所以研究如何改善金属润湿性对制备高性能ysz - ni金属陶瓷复合材料有着重要的意义。
To settle the wetting quality between carbon fibers and copper matrix , several solutions were used to treat with the surface of carbon fibers 为解决碳纤维与基体间的润湿性问题，本研究采用多种镀液对碳纤维进行表面镀铜处理。
Resin with fine wetness systems , and the system can grow to be thixotropic structure during grind , we can add bentonite by dry powder directly 1对于润湿性良好的树脂系统及研磨时，体系可以发展成触变结构时，可以采用有机膨润土干粉直接加入。
Moreover , such reservoirs have high temperature , medium - highly hydrophilic , not sensitive to water , acid and alkali , and have good feasibility of waterflooding 而且该类油藏温度高，储层润湿性为中强亲水，对水、酸、碱不敏感，具有较好的注水可行性。
In the process of fabricating the composite , there are two key technical questions , that is the wetting quality and even - distribution of carbon fibers in matrix 碳纤维在基体中的润湿性问题和均匀分布问题是该类复合材料制备中需要解决的关键技术问题。
Wettability , porosity and maximum oil saturation of 1172 sandstone samples from oilfields of jiyang seg , dongpu seg and tuba basins are detemined by laboratory analysis 摘要通过实验的方法，测定了济阳坳陷、东濮坳陷及吐哈盆地1172个含油砂岩样品的润湿性、孔隙度以及最大含油饱和度。
Sem / eds characterization revealed that the improvement of the wettability was relative to the dissolution and diffusion of carbides in ni , and reflected in microstructure of interfaces 通过sem eds观察发现，体系润湿性的改善与陶瓷相在金属相的溶解与扩散有关，直接反映在界面反应层的组织结构上。
The enhancement of water wettability , better optical transparency , and higher wear resistance have been found after the samples were treated under high rf power , bias voltage and gas pressure conditions 在较高射频功率、基板负偏压、反应气体压强状态下制备膜层的润湿性、耐磨损性较好,而光学透过率较低。
The wettability between ni3al and tic was measured by high temperature microscope , and then the effect of mo addition on the wettability of ni3al / tic and the mechanism of interface reaction were mainly discussed 利用高温显微镜测定了ni _ 3al与tic的润湿性，并分析了mo对ni _ 3al / tic润湿性的影响及其界面反应机理。
The joining method improved the wettability between the interlinker and the composites and the interlinker could infiltrated into the composites , which increased the contact area and improved the properties of the joints . 2 这种方法通过改善连接剂与复合材料的润湿性，使连接剂渗入复合材料孔隙中，大幅度增大了连接剂与复合材料的接触面，提高了连接性能。
