模具

• The mould is then covered to exclude dust .
  然后将模具盖好，以防尘埃。
• This will reduce and equalize mold temperatures .
  这样会降低和均衡模具温度。
• It seems he is a tool-and-die maker .
  他好像是个模具工人。
• Mold temperature is controlled by water flow in cooling channels .
  模具温度可用冷却槽中水的流动来控制。
• Also the machine mold is up to the required temperature and is usually controlled by thermostat .
  模具应达到所要求的温度而通常用恒温器控制。
• In grid casting operations, mold spray application involves time when no grids are produced .
  在板栅铸造过程中，给模具喷涂也占用时间，其间不生产板栅。
• Multi-cavity molds are sometimes provided with knock-out pins for easy ejection of the casting from the molds .
  多腔模具有时装有顶钉，以便铸件易于脱模。
• All lead castings were produced at first by hand in many cases from single cavity molds .
  起初所有的铅铸件都是手工生产的，而且在许多情况下都是使用单腔模具。
• Eight grid molds of the conventional design are mounted, equally spaced along the table top's circular edge .
  八个普通结构的板栅模具，沿工作台顶部周边间隔相等。
• Too much water reduces the adhesion and too little piles the material up too thick on the mold surface .
  水太多会减少粘附力，加水太少则会使脱模剂在模具表面堆积太厚。