With the very low water to cement ratio , rpc has ultra - high strength high ductility and low permeability . in this paper , the compressive strength of rpc can reach to a high point with the number approximately 135mpa . as illustrated from the study results , we can approve some fundamental conclusions : there are big effects on rpc with deferent kinds and properties of raw materials and deferent curing conditions ; stress - strain curve shows the process of destroy with rpc samples ; x - ray diffraction analysis indicates that heat treatment at temperatures 90 accelerate the hydration of rpc sharply , therefore , mechanical and microstructural properties of rpc are highly dependent on heat treatment ; it is believed that rpc materials have excellent resistance to chloride permeability ; during the heat treatment , the shrinkage of rpc developed quickly because of chemical reactions ; the rpc with slag mostly has the advantage of rpc without slag about resistance to solutions corrosion 研究结果表明：通过对rpc各组分掺量变化的研究，可以找到rpc的最优配合比；试件成型后的热养护制度对rpc的性能影响巨大； rpc的抗压应力?应变曲线可以反映出试件受破坏时微裂纹的扩展情况，刚纤维的掺入可以大幅改善rpc的韧性； rpc在成型后存在较大的收缩，而其中的化学收缩要远远大于干燥收缩； rpc具有很强的抗氯离子渗透性能，浆体的密实度很高；通过x射线衍射实验，可以发现rpc的胶凝体中ch晶体已经几乎不存在，胶凝体主要由c - s - h凝胶和未水化水泥颗粒组成；在抗溶液侵蚀的实验中，掺矿渣rpc的抗溶液侵蚀性能在绝大多数情况下要好于不掺矿渣试件，酸、碱溶液和浙江工业大学硕士学位论文摘要一些盐溶液都会对rpc的结构产生侵蚀作用，但是机理各有不同。
Modeling of controlled process and designing of control algorithms for the experiments is given in chapter three . take inverted pendulum as an example , first , the modeling and controller designing of single and double inverted pendulum is introduced , the method of adding matlab / simulink experiment models to the web - based virtual laboratory is given , the physical single inverted pendulum is controlled with pid control and state feedback control algorithms , and the results is analyzed , compared properly with corresponding simulations 以倒立摆实验为例，浙江工业大学硕士学位论文一摘要介绍一、二级倒立摆实验在服务器端的建模、控制算法的设计过程，以及将matlab / simulink实验模型添加到网络虚拟实验室的方法，同时还实现了一级倒立摆实物的pid控制及状态反馈控制，并与相应仿真实验作了适当的分析比较。
Tong shao - ping , male , born in 1971 , received industrial master degree in zhejiang university of technology in 1995 ; received scientific doctor degree in zhejiang university in 2002 ; as a post - doctor in zhejiang university from 2002 ~ 2004 ; from mar 2004 to now , as a teacher in zhejiang university of technology 1971年生， 1995年于浙江工业大学获工学硕士学位； 2002年于浙江大学获理学博士学位； 2002 ~ 2004年在浙江大学环境科学与工程从事博士后研究， 2004年3月进入浙江工业大学应用化学系工作。
Cooperation with the universities and colleges widely , such as sichuan university , zhejiang university , zhejiang university of technology , etc . established long design research item . mainly products are : tv - if saw filters for color tv sets and b / w tv sets , cordless phone saw filters , saw resonator and all kinds of low insertion saw components in the communication 公司与四川大学、浙江大学、浙江工业大学等大专院校建立长期的科研合作关系，主要设计开发的产品有：电视中频声表面波滤波器、无绳电话声表面波双工器、广泛应用于通信领域的声表面波谐振器和各类低插损声表面波带通滤波器。
In this dissertation , permanent magnet bearings is built into finite element model for analyzing mechanical characteristics . based on ansys , mechanical characteristics of permanent magnet bearings can be calculated by inputting dimensions and physical parameters on the built actual structure . finite element model can achieve accurate calculation , providing a new analysis tool for the study of permanent magnet bearings 浙江工业大学硕士学位论文建立了永磁轴承力学特性的有限元分析模型，在ansys环境下对永磁轴承的力学特性进行了有限元分析，计算结果具有很高的精度，表明有限元法是一种分析永磁轴承力学特性的有效手段。
The fourth chapter not only point out the role of government in regional innovation networks , but also expound the functions of government from macroscopic and microscopic aspects in regional innovation networks . the fifth chapter makes a comparative analysis between the innovation networks of traditional industry district and the innovation networks of high technology industry district , and point out their differences and similarity between the two type regional innovation networks . moreover , expound how to constitution and develop regional innovation networks 浙江工业大学硕士学位论文第五章着重对传统产业区创新网络与高技术产业区创新网络进行了多角度地比较分析，指出了他们在网络形成基础、创新思想来源、网络联系的主要内容，劳动力的流动性以及与区域外部网络联系的强度方面存在着差异，在政府的作用、创新的产业文化、非正式的交流方面存在着相同或相似之处。
In chapter three , 5 main classifications of language and 6 typical subjects of nqtmda are analyzed systematically and respectively from integer and item of the tests , which analyzes the results of english test result in emphasis and reflects the quality of tests from the point of view of quantification . also we analyze the status of candidate crowd and violating the exam discipline . chapter four constructs the statistic and analysis system of nqtmda , and demonstrates the integral architecture of the system , and the features of this application software are introduced 第三章通过实验分析，以实际应用为目的，对2001 、 2002年度同等学力申请硕士学位全国统一考试中报考人数较多，涉及范围较广、较具典型性的五个外国语语种和六个一级学科分别进行了系统的抽样统计分析，包括试卷整体分析和项目分析，重点对英语考试结果进行完整的统计分析，从量化的角度反映了试卷和浙江工业大学硕士学位论文试题的质量，并对考生的人群状况，以及违纪情况作了统计与分析。
This arithmetic can detect the digital watermark without the original carrier image and the original watermark . experimental results prove that this arithmetic can hide the meaningful watermark efficiently in the carrier image , and it is robust enough to resist some image degradation processing such as clipping , jpeg compression , adding noise , image enhancing , filtering and so on 实验浙江工业大学硕士学位论文结果表明，该算法可有效的将有意义的二值水印图像嵌入到彩色载体图像中，在抽取水印图像时不需要原始载体图像和原始水印图像，并对裁剪、 jpeg压缩、加噪、图像增强、滤波等处理都有很好的抵抗力，具有较好的鲁棒性。
Chapter two conducts a thorough expatiation upon fundamental principles of mass customization with a brief introduction of mass construction and the major characteristics that differentiate conventional mode of production and mass customization , expounding relevant techniques required by mass customization management 介绍了大规模定制的基本概念，归纳了大规模定制别于传统的生产模式? ?大规模生产的一些主要浙江工业大学工程硕士学位论文摘要特征，探讨了运用大规模定制的基础技术、关键技术和适用范围。
In addition , i bring up a few bottlenecks which start - ups demand to break . secondly , for the aim of promoting start - ups " growth , and improving high technology entrepreneurship rate , i make research following two main lines that are high technology start - ups " growth mode and entrepreneurship environment 其次，围绕促进高技术新创企业成长，提高其创业成浙江工业大学硕士论文:浙江省高技术新创企业成长模式与创业环境研究功率这一目标，通过高技术新创企业的成长模式和创业环境两条主线展开研究。
